Teledyne PATHFINDER Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 240

Teledyne PATHFINDER Скачать руководство пользователя страница 21

Pathfinder DVL Guide

April

2018

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

Page 9

Setting up the Pathfinder System

Use this section to connect the Pathfinder to a computer and establish communications. Install the TRDI

Toolz software in order to communicate with the Pathfinder.

Computer and Software Considerations

The Pathfinder system includes the utility program TRDI Toolz to help set up, use, test, and troubleshoot

the Pathfinder. Use this program to “talk” to the Pathfinder and to run script files (see

Creating or Modify-

ing Command Files

and

send the Commands to the Pathfinder

). For detailed information on how to use

TRDI Toolz, see the TRDI Toolz Help file.
TRDI designed the Pathfinder to use a Windows® compatible computer. Table 8

lists the minimum com-

puter requirements.

TRDI highly recommends downloading and installing all of the critical updates, recommended

updates, and the service releases for the version of Windows® being used prior to installing

any TRDI software.

Table 8:

Minimum Computer Hardware Requirements

Windows® 7, 8.1, or 10
1GHz class PC 32-bit (64-bit recommended)
2GB of RAM (4GB or more RAM recommended)
50 MB Free Disk Space plus space for data files (A large, fast hard drive is recommended)
Minimum display resolution of 1024 x 768, 256 color (higher recommended)
CD-ROM Drive (if software is installed from CD)
Mouse or other pointing device

Software Installation

To install the Pathfinder Software and Documentation CD:

1.  Insert the CD into the drive.
2.  Use Windows Explorer® to open the CD drive folder.
3.  Double-click on the launch.exe file. When the browser starts:

•

To install TRDI Toolz, click the View Manuals button and then click the In-

stall TRDI Toolz button.

•

To view the Pathfinder documentation, click the View Manuals button.

Many companies require that Autorun be disabled. Double-click on Launch.exe to start the

browser on all TRDI software and documentation CDs.

«
...
19
20
21
22
23
...
»

Содержание PATHFINDER

















































































































































































































































Отзывы:

Нет отзывов