Teledyne HDO9000 Скачать руководство пользователя страница 163

Страница: 163 / 188

Utilities

Create LabNotebook Entry

1. On the Hardcopy dialog, choose

LabNotebook

2. Touch

LabNotebook Preferences

and set up your notebook preferences.

Choose Print Color Scheme

To change the color of your print output, touch the

Color

button on the Hardcopy dialog and choose

from:

Standard

(default) - prints objects on a black background, as they appear on the display.

Print

- prints objects on a white background using your chosen colors. This option saves ink.

Black & White

- prints objects in grayscale.

Note:

The colors used to represent channels in Standard and Print schemes are configured on

the

Preferences Colors

dialog.

Set Print Area

To limit which part of the touch screen is captured, touch

Hardcopy Area

on the Hardcopy dialog and

choose from:

Grid Area Only

- omits dialogs and menus and prints only the grids.

DSO Window

- prints the dialogs with the grids.

Full Screen

- prints the entire touch screen.

Drawing Tools

To open the

drawing toolbar

for mark up as each new capture is saved, select

Annotate Before Print

153

Содержание HDO9000





























































































































































































Результаты поиска

Содержание HDO9000

Отзывы:

Бренды по названию

Популярные бренды

Teledyne HDO9000, Руководство оператора

Результаты поиска

Содержание HDO9000

Отзывы:

Бренды по названию

Популярные бренды