Tektronix Keithley 2268 Series, Справочное руководство

Страница: 224 / 253

SCPI Command Reference Series 2268 850 Watt DC Power Supplies Reference Manual
222 2268S-901-01 Rev. A / January 2015
SCPI COMMAND TREE
The SCPI commands are organized into a tree structure. To illustrate the tree structure, the
following tree has been provided. Each level of indentation presents a branch. The command
to execute can then be found by following the tree from the root or farthest left node all the
way down to the leaf node.
For example, to do the analog isolated programming command, start at the [:]CALibration
root node, go through the :OUTPut node and then move down past the [:VOLTage]
and :CURRent nodes which appear at that level to the :ANALog node and then move through
the optional [:VOLTage] node to the :ISOLated node.
Thus, the command would then be
[:]CALibration:OUTPut:ANALog[:VOLTage]:ISOLated
All commands can be formed by looking at this tree and taking the unique path from the root
node to the leaf node. The table that follows shows all the commands fully formed with
parameters.
[:]CALibration
:INPut
:ANALog
[:VOLTage]
:CURRent
:OUTPut
[:VOLTage]
:CURRent
:MONitor
[:VOLTage]
:ISOLated
:CURRent
:ISOLated
:ANALog
[:VOLTage]