Tektronix Keithley 2268 Series, Справочное руководство

Страница: 192 / 253

LAN/Ethernet Setup and Communication Series 2268 850 Watt DC Power Supplies Reference Manual
190 2268S-901-01 Rev. A / January 2015
SYSTEM COMMANDS
The system commands control the system-level functions of the power source.
Subsystem Syntax
SYSTem
:COMMunicate
:LAN
:ADDRess Set LAN IP address
:APPLy Apply the change in setting
:CLASs Set LAN Host bits
:DEFault Set LAN to a default known setting
:DESCription Set user description
:DNSaddress Set LAN DNS address
:GWADdress Set LAN Gateway
:PASSword Set LAN password
:PORT Set LAN socket port address
:MACAddress Read the MAC address
SYSTem:COMMunicate:LAN:ADDRess
This command will set the LAN IP address. The query format returns the IP address set. To query the actual
IP address used by the LAN interface (in case the IP address is not static but assigned by a DHCP server),
the NCON parameter (Network Connection Setting) must be added to the query. The default value is
0.0.0.0.
Command Syntax
SYSTem:COMMunicate:LAN:ADDRess <NRF>
Parameters ddd.ddd.ddd.ddd <IP address>
Example SYST:COMM:LAN:ADDR 255.255.167.2
Query Syntax SYST:COMM:LAN:ADDR?
SYST:COMM:LAN:ADDR? NCON
Returned Parameters <CRD>
SYSTem:COMMunicate:LAN:APPLy
This command will apply the changes in LAN setting. The controller will go to reset condition and the new
LAN setting will take effect.
Command Syntax
SYSTem:COMMunicate:LAN:APPLy
Parameters none
Example SYST:COMM:LAN:APPL
Query Syntax no query for this command
Returned Parameters none