Series 2268 850 Watt DC Power Supplies Reference Manual
Remote Operation
2268S-901-01 Rev. A / January 2015
119
TERMINAL CONFIGURATION
The terminal program allows serial communication with the power supply. To use a terminal
program, set it up using the parameters from the following sections. If you wish to use
HyperTerminal, see “HyperTerminal” on page 119 for instructions setting it up.
Data Format
Serial data format is 8 bit, one stop bit. No parity bit. Flow control: none.
End of Message
The end of message is the Carriage Return character (ASCII 13, 0x0D).The power supply
ignores the Line Feed (ASCII 10, 0x0A) character.
HyperTerminal
The HyperTerminal program is a standard windows program and can be found in
Start >All
Programs >Accessories >Communications >Hyper Terminal.
Setting up a HyperTerminal Connection
To set up a HyperTerminal connection:
1.
When HyperTerminal opens, it will immediately enter the New Connection
wizard.
If you don't already have a connection saved, continue.
If you do, click cancel and then open the pre-existing connection and skip the remaining
steps in this procedure.
2.
Enter a name.
Include the name of the interface you are intending to use for the connection as part of
the name.
3.
Click OK.
4.
Select the COM port that is connected to the interface you wish to use to connect to
the power supply.
Содержание Keithley 2268 Series
Страница 102: ......
