Suzuki FL125S, Руководство по обслуживанию

Страница: 328 / 399

8-53 FL125SDW
6) Disconnect the ECM coupler.
7) Check the continuity between Br/B wire
B
and terminal
4
.
!
TP sensor lead wire continuity: Continuity (
)
)
$
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
*
Tester knob indication: Continuity test (
)
)
%
Is the continuity OK?
8) After repairing the trouble, clear the DTC using SDS tool.
(
#
8-39)
Step 1 (When indicating P0120-L:)
1) Turn the ignition switch OFF.
2) Remove the right leg shield. (
#
5-6)
3) Check the TP sensor coupler
1
for loose or poor contacts.
If OK, then check the TP sensor lead wire continuity.
4) Disconnect the TP sensor coupler.
5) Check the continuity between P wire
C
and ground.
6) Also, check the continuity between P wire
C
and Br/B wire
B
.
If the sound is not heard from the tester, the circuit condition is
OK.
When using the multi-circuit tester, do not strongly
touch the terminal of the ECM coupler with a needle
pointed tester probe to prevent the terminal damage
or terminal bend.
YES Go to Step 2.
NO P wire shorted to VCC, or Br/B wire open
1
ECM coupler (Harness side)
1
1