Suzuki 2009 LT-A500XP, Руководство по обслуживанию

Страница: 208 / 624

1D-60 Engine Mechanical:
Oil Filter / Starter Motor
Install a new oil filter (1) and starter motor (2). Refer to
“Engine Oil and Filter Replacement: in Section 0B”
and “Starter Motor Removal and Installation: in
Section 1I” .
Engine Top Side
Assemble the engine top side (1). Refer to “Engine Top
Side Assembly (Page 1D-22)”.
Conrod and Crankshaft Inspection
B931H21406036
Refer to “Engine Bottom Side Disassembly (Page 1D-
46)”.
Refer to “Engine Bottom Side Assembly (Page 1D-52)”.
Conrod Small End I.D.
Measure the conrod small end inside diameter with the
dial calipers.
If conrod small end inside diameter exceeds the service
limit, replace the conrod.
Special tool
(A): 09900–20605 (Dial calipers (10 – 34 mm))
Conrod small end I.D.
Service limit: 20.040 mm (0.7890 in)
Conrod Deflection
Wear on the big end of the conrod can be estimated by
checking the movement of the small end of the rod. This
method can also check the extent of ware on the parts of
the conrod’s big end.
Special tool
(A): 09900–20701 (Dial gauge chuck)
(B): 09900–20607 (Dial gauge)
(C): 09900–21304 (V blocks)
Conrod deflection
Service Limit: 3.0 mm (0.12 in)
1
2
I931H1140287-01
1
I931H1140249-01
(A)
I831G1140292-02
(A)
(B)
(C)
I831G1140293-01