Suzuki 2009 LT-A500XP, Руководство по обслуживанию

Страница: 525 / 624

Steering / Handlebar: 6B-10
Wheel
Unit: mm
Tightening Torque Specifications
B931H26207002
NOTE
The specified tightening torque is described in the following.
“Steering / Handlebars Components (Page 6B-1)”
“Steering / Handlebars Assembly Construction (Page 6B-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List: in Section 0C” .
Special Tools and Equipment
Recommended Service Material
B931H26208001
NOTE
Required service material is also described in the following.
“Steering / Handlebars Components (Page 6B-1)”
“Steering / Handlebars Assembly Construction (Page 6B-2)”
Item Standard Limit
Steering angle 46
°
(right & left) —
Turning radius 3.1 m (10.2 ft) —
Toe-out (with 75 kg, 165 lbs) 5
±
4 mm (0.20
±
0.16 in) —
Camber –1.3
°
—
Caster 3.7
°
—
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lbf-ft
Rear brake lever holder clamp bolt 11 1.1 8.0
)
(Page 6B-4)
Handlebar clamp bolt 26 2.6 19.0
)
(Page 6B-4)
Throttle lever case bolt 4 0.4 3.0
)
(Page 6B-5)
Steering shaft lower nut 162 16.2 117.0
)
(Page 6B-7)
Tie-rod lock-nut 29 2.9 21.0
)
(Page 6B-8)
Tie-rod end nut 29 2.9 21.0
)
(Page 6B-9)
Material SUZUKI recommended product or Specification Note
Grease Water resistance grease P/No.: 99000–25160
)
(Page 6B-6) /
)
(Page 6B-
7) /
)
(Page 6B-7)
Handle grip bond Handle Grip Bond (commercially
available) —
)
(Page 6B-4)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent P/No.: 99000–32030
)
(Page 6B-7)