Suzuki 2009 LT-A500XP, Руководство по обслуживанию

Страница: 120 / 624

1A-49 Engine General Information and Diagnosis:
P0110-H (Use of SDS)
Step Action Yes No
1 1) Remove the left side cover. Refer to “Front Side
Exterior Parts Removal and Installation: in Section
9D”
.
2) Turn the ignition switch OFF.
3) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
4) Disconnect the IAT sensor coupler.
5) Disconnect the ECM coupler. Refer to “ECM Removal
and Installation: in Section 1C” .
6) Insert the needle pointed probes to the lead wire coupler.
7) Check the continuity between the Dg wire “A” and
terminal “28”.
Also, check the continuity between the B/Br wire “B” and
terminal “24”.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity test (
)
Is the continuity OK?
Connect the ECM
coupler and go to step
2. Dg or B/Br wire open.
I931H1110043-01
“B”
(B)
(A)
“A”
“24” “28”
I931H1110044-01