Suzuki 2009 LT-A500XP, Руководство по обслуживанию

Страница: 473 / 624

Rear Brakes: 4C-7
• Install the balls and rear brake pressure plate (14).
NOTE
When installing the rear brake pressure plate
(14), align its groove “A” with the cam “B” of
rear brake cam shaft (10).
• Install the rear brake plates (15), aligning the grooves
“C” of the case.
NOTE
Align the side plate pin with groove “C” of
the case as shown in the figure.
• Install the dowel pins (16) and gasket (17).
CAUTION
!
The removed gasket must be replaced with a
new one.
Rear Brake Parts Inspection
B931H24306006
Refer to “Rear Brake Disassembly and Assembly
(Page 4C-3)”.
Rear Brake Cam Lever
Inspect the rear brake cam lever for wear or damage. If
any wear or damage is found, replace it with a new one
Inspect the rear brake cam lever return spring for wear
or damage. If any wear or damage is found, replace it
with a new one.
Oil Seal
Inspect the oil seals for wear or damage. If any wear or
damage is found, replace it with a new one.
Bearing
Inspect the inner race play of the bearing by hand while
it is in the rear brake case.
Turn the inner race by hand to inspect for abnormal
noise or smooth rotation.
• If there is anything unusual, replace it with a new one.
“B”
10
14
“A”
I931H1430019-01
“C”
15
I931H1430020-01
16
16
17
I931H1430021-01
I931H1430025-01
I931H1430022-01
I649G1240015-02