Suzuki 2009 LT-A500XP, Руководство по обслуживанию, Страница: 536 / 624

6C-10 Power Assisted Steering System:
Steering Related Parts
Refer to “Steering Related Parts Inspection: in
Section 6B” .
Battery
Battery voltage inspection
1) Turn the ignition switch OFF.
2) Remove the seat. Refer to “Seat Removal and
Installation: in Section 9D” .
3) Measure the voltage between the (+) and (–) battery
terminals using the multi-circuit tester.
If the voltage is less than 12.0 V, charge or replace
the battery and inspect the charging system. Refer to
“Battery Runs Down Quickly: in Section 1J” .
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Voltage (
)
Battery voltage
12.0 V and more
4) Reinstall the seat.
EPS control unit ground wire inspection
1) Turn the ignition switch OFF.
2) Remove the seat. Refer to “Seat Removal and
Installation: in Section 9D” .
3) Disconnect the battery (–) lead wire.
4) Remove the front fender. Refer to “Front Side
Exterior Parts Removal and Installation: in
Section 9D”
.
5) Disconnect the EPS control unit coupler (1).
6) Check for continuity between terminal “A” at the
coupler and the battery (–) terminal.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity (
)
EPS control unit coupler (Vehicle harness end)
( ޓ )
( ޓ )
(A)
I931H1630010-01
I931H1630011-01
1
I931H1630012-02
“A”
(A)
I931H1630020-01
(A)
I931H1630014-02