SuperFlow AutoDyn, Руководство оператора

Страница: 53 / 208

M a n u a l
AutoDyn
Section 5 - Page 16
AutoDyn manual Section 5. PM7, 5/2004
network names are correct, and that the NetBEUI protocol is bound
to your installed network interface card.
If you cannot get WinDyn to communicate with the sensor box, contact
a SF customer service engineer for assistance
5.2.2.6. How to configure your system for US units or Metric units
The AutoDyn is completely configured by software. At the time
of installation of WinDyn on your PC, you will be asked to
select the language and units system of your choice. The
configuration files appropriate for these selections will then be
installed in the main system directories. Other configuration
files will be copied to inactive directories.
We have made the selection of “appropriate configuration
files” based on the most common combinations of languages
and units systems. You will find that following configuration
choices are available as standard:
Language Units
English US
English Metric
Dutch Metric
F r e n c h Metric
Spanish Metric
German Metric
Italian Metric
Swedish Metric
The Units system is applied consistently. This means US unit
configurations will use all Imperial units and Metric unit
configurations will use all S.I. units.
Changing from one units system to the other or from one language to
another is possible by simply loading the appropriate Test Group. This
Test Group will load configurations and screens as appropriate.
☛
NOTE The system configuration files are essential to the operation of the system and
most of the other files (such as display files, test files, limits files, etc.) are linked
to specific configuration files. To avoid selecting incompatible files, we
recommend the use of the “Test Group” function which automatically loads
compatible files. Refer to the Test Group section (Section 12.2. “Design Test
Group”) of the WinDyn section of this instruction manual for more details.
For specific measurements, some customers may wish to use
different units than the ones defined in the default configurations.
Example
:
metric configurations systematically use kilowatt (kW) for
power, but you may wish to have horse-power (HP) instead,
while keeping all other metric units.