SuperFlow AutoDyn, Руководство оператора, Страница: 84 / 208

H
A N D H E L D
C
O N T R O L L E R
Section 7 - Page 9
7.2.2. Configuration of System
From the power-up screen, the system configuration screen
can be accessed by pressing “IHGF”. A warning message will
be displayed and an access code (password) is required to
continue. The access code can be provided by your customer
service representative. The system configuration screen will
then be displayed.
F G H I J
System Configuration Save
Configuration file found, saved on:
Wed, Aug 5, 1998 version= 2.00
Setup Setup System Ctrl
Accel Torques Type Setup Exit
A B C D E
First you must select the system type you are using:
F G H I J
Select System type:[2]
0= Standard Grav Fuel System
1= Standard system, no Grav Fuel
2= SF-820 Chassis Dyno
3= SF-602 Chassis Dyno
4= Motorcycle Dyno (CycleDyn)
5= Towing Dyno system
A B C D E
For an AutoDyn configuration, you will be prompted to enter
the roll speed channel, differential temperature channel,
differential trip temperature, and ratio. If unsure, leave the
default values (speed=ch.10,differential temperature=0,
differential trip temperature=0).
Differential ratio is specific to the type of Autodyn you use. You
then have the option of defaulting all other parameters for your
system. This includes:
- acceleration setup
- torque offsets
- controller scales
- control (PID) parameters
- control setup values
More information on these configurations is available in
other sections of this manual