SuperFlow AutoDyn, Руководство оператора, Страница: 7 / 208

Safety
1-4 AutoDyn Chassis Dynamometer Operator Manual
• Provide fire extinguishers that are rated for electrical and oils.
• Provide adequate lighting in the test cell and at the operators console.
• Always wear proper protective clothing and eye/ear protection.
• Refer all service questions to qualified personnel.
• Do not remove any safety guards while the machine is in operation and be sure the safety
guards are correctly mounted before operating the device.
• Disconnect the external power switch before opening the rear panel of the device.
• Replace the power cable if it is damaged.
• Keep the air inlet grids free of dust or dirt.
• Keep loose material away from the inlet and exhaust air ducts.
• Do not store flammable materials in the vicinity of the dynamometer.
• Keep all personnel, flammable items, and sensitive objects away from any rotating object
that can throw debris radially outward.
1.3 Room Requirements
When working in or building a test cell:
• Follow all local construction codes.
• Install a Carbon Monoxide (CO) detector in the test cell.
• Provide fire extinguishers that are rated for gasoline and oils.
• Provide adequate lighting in the test cell and at the operators console.
• Provide a means outside the test cell to turn off the ventilation fans and electrical circuits.
1.4 Noise Levels
SuperFlow Technologies Group always recommends ear protection when operating any product.
Warning Signs of Hazardous Noise
1
• You must raise your voice to be heard.
• You cannot hear someone two feet away from you.
• Speech around you sounds muffled or dull after leaving a noise area.
• You have pain or ringing on your ears (tinnitus) after exposure to noise.
1. Information in this section was adapted from “Noise and Hearing Loss,” American Speech-Language-Hearing
Association, 1997–2007, http://www.asha.org/public/hearing/disorders/noise.htm , 2007.