manualshive.com logo in svg

SuperFlow AutoDyn, Руководство оператора, Страница: 54 / 208

Поделиться
Скачать
SuperFlow AutoDyn Скачать руководство пользователя страница 54

I

N S T A L L A T I O N

Section 5 - Page 17

In that case, the standard configuration file that most closely fits your
requirements should be selected and then modified where desired, using
the channel configuration editor. Refer to the Configuration Editor
section (Section 16 “Configuration File Editor”) of the WinDyn instruc-
tion manual for detailed instructions.

☛

NOTE

Screen display files (*.CDF), Specifications files (*.CST), and Autotest files

(*.TPF) are linked to specific configuration files. If you have saved a modified

configuration file under a new name, you will have to rebuild those links for the

screen, specifications, and test files to work with the new configuration file.

5.3.

Calibration

☛

NOTE

All models are calibrated at the factory. You may wish to check the load cell

calibration  prior to first use of the AutoDyn.  Please see Section 20. “Service

and Calibration” for instructions.

Содержание AutoDyn

















































































































































































































Отзывы:

Нет отзывов