SuperFlow AutoDyn, Руководство оператора

Страница: 96 / 208

H
A N D H E L D
C
O N T R O L L E R
Section 7 - Page 21
7.2.5.3. Configuration of Calibration
Calibration function selection screen
F G H I J
Select required calibration function:
Ch#1 0 Ch#2 0 Ch#3 0
Ch#4 0 Ch#5 0 Ch#6 0
Ch#7 0 Ch#8 0 Ch#9 0
--- Fuel System ---
Sensors Slope Weight Volume Exit
A B C D E
Selection of Sensor calibration (“A” - key)
F G H I J
Select required calibration function:
Ch#1 0 Ch#2 0 Ch#3 0
Ch#4 0 Ch#5 0 Ch#6 0
Ch#7 0 Ch#8 0 Ch#9 0
Reload Save
file file Edit Exit
A B C D E
“Reload file” will load the calibration file last saved on your
computer into the test system.
“Save file” will save the current calibration data of your
system on the computer.
“Edit” gives access to the individual channels for calibration,
as in the next screen.
Sensor Calibration screen
F G H I J
Select channel to calibrate
<Ch#1 >=xx <Ch#2 >=xx <Ch#3 >=xx
<Ch#4 >=xx <Ch#5 >=xx <Ch#6 >=xx
<Ch#7 >=xx <Ch#8 >=xx <Ch#9 >=xx
<Ch#10 >=xx <Ch#11 >=xx <Ch#12 >=xx
<Ch#13 >=xx <Ch#14 >=xx <Ch#15 >=xx
PageUp PageDn Select SortList Exit
A B C D E