SuperFlow AutoDyn, Руководство оператора

Страница: 27 / 208

M a n u a l
AutoDyn
Section 3 - Page 6
AutoDyn manual Section 3. PM7, 5/2004
WARNING Lifting the dynamometer with the forks only partially engaged in the slots may
result in tipping and falling of the dynamometer, resulting in damage, severe
injury, or death. Use extreme caution when moving heavy equipment.
WARNING If the dynamometer is lifted with the absorber module attached, the frame may
tip over. Use an additional lifting sling around the absorber module.
3.3.2. Absorber module
The absorber module is shipped on a pallet. It can be lifted with a forklift
or pallet jack.
3.4. Packaging of the AutoDyn
Following list can be used as a check sheet when your AutoDyn arrives.
1. One dynamometer mounted in a wooden frame. The dynamometer is
shrink-wrapped and secured by metal straps.
This package includes:
1.1. the main dynamometer frame
1.2. the calibration arm assembly (models with truck axle only)
1.3. the vehicle restraint bars (set of 3)
2. One absorber module mounted on a pallet. The absorber module is
shrink-wrapped and secured by metal straps.
This package includes:
2.1. the absorber module
2.2. the drive-shaft
3. One 32”x24”x17” (81x61x43 cm) carton on a separate pallet.
This includes:
3.1. the sensor box
3.2. an accessory box containing:
3.2.1. the handheld controller
3.2.2. all sensors, accessory cables, and mounting hardware
3.2.3. the manual, software disks, and a system calibration
envelope (in a sealed plastic bag)
3.2.4. 1 AutoDyn video tape
3.2.5. 2 WinDyn video tapes