SuperFlow AutoDyn, Руководство оператора, Страница: 57 / 208

AutoDyn
Operators Manual
Section 6 - Page 4
CH6 AutoDyn Operation.fm
• Do not turn the steering wheel while the rolls are turning. Doing so may cause the
vehicle to sway sideways off the rolls. If the front tires are on the spinning rolls, turning
the steering wheel may cause a torque steer condition where the tires will go to a full
lock position, left or right.
• Clear the area behind the vehicle before starting any test. Rocks or other debris may
be projected from the tires and could cause bodily injury or material damage.
• Wear ear and eye protection at all times when testing.
6.2.2 Handheld stop key
To reset the system at any time or to stop a test under way, press the stop key on the handheld as
shown below. This will remove the load from the dynamometer and reset the handheld to the main
operation screen.
Figure 6-1 Handheld Stop Key
6.3 Preliminary checks
Both the AutoDyn and the vehicle should be checked before testing to ensure safety and accurate
results. The form provided on the next page can serve as a guideline for a Pre-Test Checklist of
the vehicle. System checks should be performed prior to testing.
S u p e r F l o w
STOP