Design and function
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
57
These measures are intended to prevent the loaded material from being too strongly pressed against
the dosing drums and the drums from becoming clogged during discharge.
During discharge, the hydraulic drive of the transport floor automatically restarts as soon as the loaded
material is no longer applying any pressure to the bottom dosing drum.
5.6
Tailgate
The tailgate can be swivelled hydraulically and closes the cargo space on the rear side. The tailgate is
lifted and lowered by means of two hydraulic cylinders via the control set.
5.6.1
Tailgate on machines without beaters
When lifting the tailgate, the hydraulic cylinders
first vertically lift the tailgate out of its locking
mechanism. The tailgate then swivels upwards to
the rear and raises completely.
When lowering the tailgate, it initially comes
down due to its dead weight. The hydraulic
cylinders only come into operation at the last
moment to close the tailgate and lower it
vertically onto the locking pin for being locked.
An electrical pressure switch as signal generator
for the automatic charging system is mounted on
the inside of the tailgate.
Fig. 25
5.6.2
Tailgate on machines equipped with beaters
When opening the tailgate, the hydraulic
cylinders (1) swivel the tailgate (2) back
upwards. The tailgate can then be opened at
different opening widths.
The first opening width of the tailgate (discharge
position) can be individually set via the control
set and the tailgate is automatically moved to
that position when pressing the
Lift tailgate
key.
When releasing and pressing the
Lift tailgate
key again, the tailgate rises as long as the key is
pressed or until the tailgate has been completely
lifted.
When lowering the tailgate, it initially comes
down due to its dead weight. The hydraulic
cylinders only come into operation at the last
moment to close the tailgate and lower it
vertically onto the locking pin for being locked.
Fig. 26