Use of machine
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
159
6.3 Press the
key once to reverse the feed direction of the transport floor for 3 seconds.
Thus, the pressing power which the loaded material applies to the dosing drums, and the
starting torque for loosening the dosing drums are reduced.
6.4 Press the
again.
The transport floor automatically switches to standby mode and the "Feed On" symbol is
flashing on the control set.
6.5 Switch the tractor's p.t.o. shaft on.
6.6 Let the tractor's p.t.o. shaft smoothly start to run such that the dosing drums are able to
loosen themselves.
The dosing drums start to run and after a short delay, the transport floor automatically starts.
7. Start to move and select the travelling speed of the tractor according to the height of the desired
discharged material stack.
7.1 Switch the p.t.o. shaft off before changing the lane on the bunker silo.
The dosing drums and the transport floor stop. The transport floor automatically switches to
standby mode and the "Feed on" symbol is flashing on the control set if the transport floor is
not separately switched off via the
key.
7.2 Change the lane.
7.3 Switch the tractor's p.t.o. shaft on.
7.4 Let the tractor's p.t.o. shaft smoothly start to run such that the dosing drums are able to
loosen themselves.
The dosing drums start to run and after a short delay, the transport floor automatically starts.
During discharge, the feed rate of the transport floor can be
changed via the keys
and
or
.
For changing the feed rate, press the
key once and the
or
key quickly in succession several times if
necessary.
Press the
key to lower the folding drawbar during
discharge on the bunker silo.
8. Press the
key once to double the feed rate of the transport floor for complete emptying.
9. Switch the p.t.o. shaft off when the cargo space has been emptied up to the dosing drums.
The transport floor will not switch off if the
key has been pressed for complete emptying.
10. Press the
key to lower the tailgate.
The
Discharge modes A I
and
A II
are deactivated and the transport floor is automatically
switched off.
11. Drive off the bunker silo.