Strautmann Super-Vitesse CFS 3101 Скачать руководство пользователя страница 21

Страница: 21 / 225

Product description

Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13

Dangerous spots are marked by warning signs attached to the machine, which warn about existing

residual risks.
In these operating instructions, activity-related safety instructions mark the existing residual risks.

Risks may arise:



due to work-related movements of the machine and its working tools,



due to substances or foreign objects blown out of the machine,



due to accidental lowering of the lifted machine/of lifted machine parts,



due to accidental starting and rolling of the machine / of tractor and machine.

Dangerous spots exist:



within the drawbar area between tractor and machine,



within the area of the powered propeller shaft,



within the area of the powered pick-up,



within the area of the pick-up, when lifting and lowering the pick-up,



within the area of the cutting unit, when extending and retracting,



beneath the machine,



beneath the lifted, unsecured tailgate,



within the area of the powered dosing drums,



within the area of the powered transport floor,



in the cargo space with the machine powered.

2.7

Type plate and CE symbol

The complete marking is treated as a document and must not be

altered or made unrecognizable.

(1) Type plate with CE symbol
(2) Vehicle/Machine ID number (embossed into

the frame)

(3) ALB plate

Fig. 5

Содержание Super-Vitesse CFS 3101


































































































































































































































Результаты поиска

Содержание Super-Vitesse CFS 3101

Отзывы:

Strautmann Super-Vitesse CFS 3101, Руководство по эксплуатации, Страница: 21 / 225

Результаты поиска

Содержание Super-Vitesse CFS 3101

Отзывы: