Operation
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
129
If the "Cutting unit" symbol moves to
"Cutting knives retracted" position
during charging:
at least one cutting knife has
been retracted from the conveyor
duct due to a foreign object,
the cutting unit is heavily soiled.
The screen shows:
Remedy in case of cutting knife/knives retracted from the conveyor duct:
1. Swivel the cutting unit completely out of the conveyor duct and in again with the feeder rotor
running.
Remedy in case of soiled cutting unit:
1. Clean the cutting unit.
Extend cutting unit
1. Press the
key until the "Cutting unit"
symbol is in "Cutting unit extended" position
and a beep is emitted.
The cutting unit is completely extended into
the conveyor duct.
The screen shows:
Lock steering axle
WARNING
Risk to people due to insufficient stability and tipping over of the
machine if the steering axle is not properly used!
It is absolutely necessary to lock the steering axle:
before travelling over bunker silos,
at travelling speeds of more than 40 km/h,
on rough road tracks,
when traversing hills,
before carrying out reverse travels.
Align the wheels of the steering axle in a straight line by means of a
short forward travel of the tractor and the hitched machine before
locking the steering axle.
When switching the control set on, the single-acting steering axle is
always in unlocked condition.