Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 23 / 258

Agency Listings, Approvals, and Requirements
53722 2-1
Section 2
Agency Listings, Approvals, and Requirements
2.1 Federal Communications Commission (FCC)
1. The following information must be provided to the telephone company before the SCSS-
700 can be connected to the phone lines:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
ACTA. On the inside cover of this equipment is a label that contains, among other
information, a product identifier. If requested, this information must be provided to the
telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord (not provided) and modular jack must be utilized with this
product. It is designed to be used with a modular jack that is also compliant.
The REN (ringer equivalence number) provided on this installation sheet is used to determine
the number of devices that may be connected to the public switched telephone network. This
number must not exceed 5.0. Since this product has an REN of 1.0, the number of devices is
limited. The REN number is imbedded in the FCC registration number as 10BIf the SCSS-700
causes harm to the telephone network, the telephone company will notify you in advance that
the temporarily discontinuance of service may be required. But if advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will
be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with the SCSS-700, for repair or warranty information, please
contact STANLEY. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the SCSS-700 until the problem has been resolved.
This product cannot be adjusted or repaired in the field. It must be returned to the factory for
service.
A Manufacturer: Honeywell International Inc.
B Model Number: SCSS-700
C FCC registration number: AC6AL11B6820
Ringer equivalence: 0.8B
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
F Service Order Code: 9.0F