Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 227 / 258

Testing and Troubleshooting
53722 12-5
12.3.2 SLC Multi Device Locator
This feature is the same as SLC Single Device Locator, except you can locate up to 8 devices
on a single search.
Follow these instructions to locate multiple SLC devices:
1. Select (Point Functions) from the Main Menu.
2. Select (SLC Dev Locator).
A message similar to the one shown in Figure 12-2 will display.
Figure 12-2 Shut Down Warning
3. Press the or arrow to toggle
NO
to
YES
then press .
If
NO
is chosen you will exit back to the Point Function menu.
If
Yes
is chosen the system will cease normal operation leaving the premise unprotected.
4. Select the SLC loop.
5. Enter up to 8 SLC addresses for the devices you wish to locate.
The LEDs on the selected devices will start flashing.
6. Press the to exit SLC multi-locator function.
Note: Once you exit the system will resume normal operation.