Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 157 / 258

Programming
53722 9-9
on the annunciator, then press .
Smoke Detector Sensitivity
All detectors in the zone will respond as programmed in this menu location.
* Automatic drift compensation is always in effect for all detectors. Detectors are sampled every 3 hours. See Section 10.4.11
for information about how to check if a detector is in compliance.
6. Use the or keys to scroll through the range or enter directly from the number keys
on the annunciator.
7. Then press .
9.3.1.3 Zone Accessory Options
Single or Multi-station cadence pattern (choose from Patterns 00 to 22).
Local Zone (choose Y or N, for Yes or No).
9.3.2 Add Zone
To add a zone, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
IMPORTANT!
Drift compensation is automatic for all smoke detectors (photoelectric and ionization). The feature is always in effect, no
programming is required. See Section 10.4.11 for information about how to check if a detector is in UL compliance.
Table 9-2: LiteSpeed Sensitivity Choices*
Detector
Protocol Type of Smoke
Detector
Choices Comments
LiteSpeed
SD355, AD355, &
SD355T
Low (3.5% obscurity) If the day/night sensitivity option is selected, you can have
different sensitivity settings during the day and at night. You
can determine the days of the week that Day/Night
Sensitivity will automatically adjust. You can also designate
specific days as Holidays. Holiday and weekend days use
night sensitivity for the entire day
Medium (2.5% obscurity)
High (1.5% obscurity)
CP355
Low (55 pA)
Medium (68 pA)
High (80 pA)
D355PL
Low (2.5% obscurity)
Medium (2.0% obscurity)
High (1.5% obscurity)