Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 199 / 258

System Operation
53722 10-7
10.4.3 View Event History
Use the View Event History feature to display events on LCD. From the Main Menu, press
to select Event History. Events will begin displaying with most recent events first.
The panel can store up to 1000 events. When it reaches its 1000-event capacity, it will delete
the oldest events to make room for the new events as they occur. In networked setups, each
panel stores up to 1000 of its own events. Viewing event history shows the Event History from
every panel in the site.
On multi-site displays, pressing or brings you directly into View Event History and
allows you to view the Event History from every panel in each of the sites the multi-site
display is assigned to.
10.4.3.1 To clear the event history
From the Installer menu select for System Tests. From the test menu select Clear History
Buffer. In network setups, this clears the History Buffer of all panels in the site.
10.4.4 Conduct a Fire Drill
1. From the Main Menu, press for System Tests.
2. Press for Fire Drill. You will be prompted to press .
3. The drill will begin immediately after you press .
4. Press any key to end the drill. (If you do not press any key to end the fire drill manually, it
will time out automatically after ten minutes.)
If a fire drill switch has been installed, activating the switch will begin the drill; deactivating
the switch will end the drill.
10.4.5 Conduct an Indicator Test
The indicator test checks the annunciator LEDs, PZT, and LCD display.
1. From the Main Menu, press for System Tests.
2. Press for Indicator Test. The system turns on each LED several times, beeping the PZT
as it does so. At the same time it scrolls each available character across the LCD. A prob-
lem is indicated if any of the following occurs:
• An LED does not turn on.
3
6