Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 110 / 258

Model SCSS-700 Installation Manual
6-4 53722
6.2.4 Computer Account
An installer at the panel site can initiate communications between the panel and a computer
running the SCSS-700PK (see also Section 10.4.14). In order for this communication to
function properly both the computer (running the software) and the control panel must have
matching computer account numbers and computer access codes.
Before you program in this location you should know how your control panel will
communicate with the downloading computer, either through direct connect USB or via the
phone lines (Internal Modem).
If the panel initiates the call to a downloading computer, a phone number must be
programmed in the computer accounts area. If the computer initiates the call, answering
machine bypass may need to be selected (see Section 9.6.2.6).
To program computer account information:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Network Programming.
3. Press to enter the Computer Account Menu.
4. Enter the computer code (up to 6-digits), then press .
5. Enter the computer access code, then press .
6. Enter the phone number the panel will dial to connect to a downloading computer (up to
40-digits), then press .
6.2.5 Access Codes
Access codes provide the user access to the control panel functions. Each access code can be
customized for each user. This allows some users the ability to access programming and other
higher level panel functions, while other users may only need access to lower level functions
such as preforming fire drills, or acknowledging trouble conditions.
Profile 1 is the profile that dictates what functions the Fire Fighter Key has access to. (The
functions that are available once you open the cabinet door and before an access code is
entered). Because this is the profile for a key the user name and the access code can not be
edited for this profile.
Profile 2 is the profile for the installer and is referred to as the “Installer Code”. This profiles
user name and panel functions can not be edited.
Table 6-1lists the panel functions that can be selected for each user profile.