Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 176 / 258

Model SCSS-700 Installation Manual
9-28 53722
9.6.2.2 Number of Answer Rings
This option is used in conjunction with the SCSS-700PK. Use the option to determine the
number of rings before the panel answers a call from the computer. Range is 00-15 rings. This
option is factory-programmed as 06 rings, which should be compatible for most installations
where the answering machine bypass feature is used. You may need to adjust it depending on
the installations telephone system.
The selection made here must match the programming for this option in the Communication
Configuration dialog box of the SCSS-700PK.
7. Enter the desired number of answer rings, then press .
9.6.2.3 Dial Option (TouchTone or Pulse)
8. Press the or arrow to select the dial option, then press .
9.6.2.4 Rotary Format
9. Press the or arrow to select the pulse ratio for rotary dialing option, then press
.
Options are:
9.6.2.5 Line Monitor
Enable the line monitor for each phone line that will be used. See Figure 9-8 for location of
this field on the phone lines screen. When the phone line monitor has been enabled for a
phone line, a trouble condition will occur if the line is not connected. If a phone line will not
be used, it must be disabled.
Dial Option Description
PULSE If this option is selected, only pulse dialing will be used for this phone line.
TT
TouchTone dialing. If this option is selected, only TouchTone dialing will be used for this
phone line.
TT/PL
TouchTone alternating with pulse. If this option is selected, the dialer will first attempt to
use TouchTone. It will switch to pulse if TouchTone is not successful on the first attempt.
It will continue to alternate between TT and pulse for additional attempts.
U U.S. standard format. Uses the 60 msec / 40 msec make/break ratio.
E European format. Uses the 66 msec / 34 msec make/break ratio.