Smiths Medical 2120 Скачать руководство пользователя страница 59

Страница: 59 / 152

Step Delivery Mode

mmi

Step Delivery Mode

Step delivery allows the infusion of a specified volume of drug at an initial rate with linear step increases

up to a plateau rate. Multiple steps down may also be applied, reducing the continuous rate as low as the

initial rate. An optional KVO (keep vein open) rate may be delivered at the end of the infusion, depending

on protocol settings.
The following graph illustrates an example step delivery:

Home Screen

The delivery mode and status of the infusion are indicated on the home screen with messages appearing

in text, a graphic in a shape unique to the therapy, and with the colors green, red, and gray. The

colors indicate that the pump is running (green), or stopped (red). If a new patient or new infusion is

programmed but

the pump has not been started,

or if a delayed start time was programmed and the start

time passed while the pump was stopped and not yet started, the graphic is entirely gray. The location of

the color on the graphic also indicates the status of the infusion. The examples below are specific to the

step delivery mode.

•

The pump is running with a programmed delayed start.

•

The pump is stopped and has not yet reached the plateau.

•

The pump is running at the plateau rate.

•

The pump is running at continuous hold after a manual step down.

•

The pump is running at the KVO rate, nearing the end of the infusion.

Step delivery mode graphics do

not

depict how many steps will be made to reach the plateau. Nor do they

depict the relative step rate increases in comparison to the initial and plateau rates.

Time

Deliv

y R

Plateau rate

Initial rate

Rate (step)

increase

Delayed

start

(optional)

KVO

Rate (step)

increase

KVO

Infusion volume

Step

duration

Содержание 2120

























































































































































Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды

Smiths Medical 2120, Руководство оператора

Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды