Smiths Medical 2120 Скачать руководство пользователя страница 18

Страница: 18 / 152

General Description

ene

Security Settings

Security settings are used to limit patient and unauthorized clinician access to certain programming and

operating functions of the pump. Pump functions are protected by 3 different security codes. The security

level tables list the functions that are available under each security code.

WARNING:

•

Do not disclose pump security codes or any other information that would allow the patient or

unauthorized clinician complete access to programming and operating functions. Improper

programming could result in serious patient injury or death.

•

Do not leave the pump unattended while unlocked. All programming functions are accessible while

the pump is unlocked, and improper programming could result in serious patient injury or death.

Security Level Tables

•

The keypad code is for clinicians who need to modify and review patient-specific parameters, and

manage air and occlusion parameter settings.

•

The clinician code allows access to all the functions the keypad code allows. In addition, it allows

users to modify most advanced tasks parameters, format the time and date, change delayed start and

priming security options, and select new protocols.

•

The administrator code allows access to all pump functions and allows users to change protocol ranges

for patient-specific parameters, reset the pump to factory defaults, and select manual mode protocols.

Its use should be restricted to the CADD

-Solis system administrator and key individuals.

Содержание 2120

























































































































































Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды

Smiths Medical 2120, Руководство оператора

Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды