Smiths Medical 2120 Скачать руководство пользователя страница 21

Страница: 21 / 152

General Description

ene

cri

ion

Autolock

The CADD

-Solis VIP ambulatory infusion pump is designed to meet both safety and usability needs. The

autolock feature reduces the chance of unauthorized pump programming. When the keypad is unlocked

with a security code and left unlocked, the software automatically locks the keypad.
If the pump is on the home screen, the autolock feature takes effect 30 seconds after the last key press.

Autolock takes longer on programming or task screens when the user typically needs more time to

perform an action. Depending on which screen was on the pump last, and if the pump is not alarming, it

can take up to 4 minutes after the last key press before the pump reverts to the home screen and autolocks

immediately. When the pump is alarming, autolock does not take effect.

NOTE:

The keypad can be re-locked by pushing the right soft key twice from the home screen or once

from the Tasks or Advanced Tasks menu. As a recommended safety precaution, always manually lock

the pump using this feature.

Entering Security Codes

WARNING:

•

Do not disclose pump security codes or any other information that would allow the patient or

unauthorized clinician complete access to programming and operating functions. Improper

programming could result in serious patient injury or death.

•

Do not leave the pump unattended while unlocked. All programming functions are accessible while

the pump is unlocked, and improper programming could result in serious patient injury or death.

NOTE:

Many of the instructions in this manual include steps to unlock the keypad. This step is required

only if the keypad is locked.

To enter a security code when prompted:

1. Press

to scroll up or down to the correct digit. Press

Accept Value

to advance to the next digit. Once the complete code

has been entered, press

Accept Value.

2. If an incorrect code is entered, a wrong code error appears. It includes

the security level required to access the function. Select

Retry

to enter

the code again.

NOTE:

If you enter a code that you believe is correct and receive

a wrong code message, check the screen to see if the code has

been customized. If the code is not customized, it was entered

incorrectly and you should retry. If the code is customized, enter

the customized code. If you do not know the code, contact your

CADD

-Solis system administrator.

Содержание 2120

























































































































































Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды

Smiths Medical 2120, Руководство оператора

Результаты поиска

Содержание 2120

Отзывы:

Похожие инструкции для 2120

Бренды по названию

Популярные бренды