Smiths Medical 1850, Руководство по эксплуатации

Страница: 26 / 82

Figure 3-4: Front Panel
13.
I.D./CLEAR
Key
11.
ON Key
12.
OFF/STBY
Key
Chapter 3: Controls
3-4 Oximeter Clinician’s Operation Manual
11. ON Key
Pressing ON turns on the monitor.
12. OFF/STBY Key
Pressing OFF/STBY turns off the monitor.
13. I.D./CLEAR Key
While the sensor is connected to the monitor: Pressing I.D./CLEAR
increases the patient number by one; the patient number is briefly dis-
played in the SpO
2
digits. Pressing and holding I.D./CLEAR for about six
seconds clears all trend data and sets the patient number to 1.
While the sensor is not connected to the monitor: Pressing I.D./CLEAR
causes the monitor to enter the trend view mode (two bar graph seg-
ments flash to indicate trend view mode.) During trend view mode, the
last valid measurement for each patient number can be shown by press-
ing the
or keys. The display shows Pn (n = patient number) then the
measurement corresponding to that patient number. If, after 20 seconds,
no keys are pressed, the monitor exits the trend view mode.