Smiths Medical 1850, Руководство по эксплуатации

Страница: 48 / 82

Chapter 5: Changing the Monitor’s Settings
5-2 Oximeter Clinician’s Operation Manual
Changing the Pulse Beep Volume
A “beep” tone sounds with each pulse beat. The volume of the “beep”
can be positioned to three settings: soft, loud, and off. To adjust the vol-
ume to the ‘off’ setting, push the PULSE VOL key once. From the ‘off’ set-
ting, set the volume to ‘soft’ by pressing the key once, or press the key
twice in quick succession to set the volume to ‘loud’.
Changing the Alarm Limits
Each measurement, SpO
2
and Rate, has a high and low alarm limit set-
ting.
Press the ALARM SEL key until the alarm limit you want to change is
shown, then press the
or key to increase or decrease the setting.
ALARM SEL
KEY PRESS
DISPLAY ALARM LIMIT
First press.
---
KI
- - - = High SpO
2
alarm limit.
(Example only.)
Second press.
85
Lo
85 = Low SpO
2
alarm limit.
(Example only.)
Third press.
Ki
155
155 = High pulse rate alarm
limit. (Example only.)
Fourth press.
Lo
50
50 = Low pulse rate alarm
limit. (Example only.)
Fifth press.
97
74
97 = SpO
2
measurement.
(Example only.)
74 = Pulse rate measure-
ment. (Example only.)