Smiths Medical 1850, Руководство по эксплуатации

Страница: 51 / 82

Chapter 6: Patient Numbers and Trend Data
Oximeter Clinician’s Operation Manual 6-1
Chapter 6: Patient Numbers and Trend Data
Description
Whenever the monitor is on, it stores one SpO
2
and one pulse rate reading every
thirty (30) seconds. The stored readings are called trend data. The monitor
remembers trend data for up to 99 patients and 24 hours of run-time.
Trend data is saved for each patient number. When you turn on the mon-
itor, the patient number is automatically incremented and displayed dur-
ing the power-up sequence if valid trend data was collected from the
previous patient. If no valid trend data was collected from the previous
patient, the patient number is displayed only and is not incremented.
The monitor remembers all the trend data and all the patient numbers
for up to 99 patients and 24 hours of run-time.
Trend data for any patient can be viewed on the monitor. Trend data for
all patients can be printed on the optional printer.
NOTE! See Printer section for information on printing trend
data.
Manually Incrementing the Patient Number
1. The SpO
2
sensor must be connected to the monitor. If the SpO
2
sen-
sor is not connected to the monitor, connect the SpO
2
sensor.
2. Press the I.D./CLEAR key to increment the patient number. The new
patient number is momentarily displayed and trend data for the new
patient is automatically saved.
Viewing Trend Data
1. The SpO
2
sensor must be disconnected from the monitor. If neces-
sary, disconnect the SpO
2
sensor from the monitor.
2. Press the I.D./CLEAR key; the following sequence occurs: