Smiths Medical 1850 Скачать руководство пользователя страница 63

Страница: 63 / 82

Chapter 8: Operating Modes

Oximeter Clinician’s Operation Manual

8-5

•

Visually inspect the sensor and oximetry cable.

•

Connect the sensor to the oximetry cable.

•

Connect the oximetry cable to the monitor.

•

Turn on the monitor.

•

Route the cable safely from the patient to the monitor to prevent
possible patient strangulation.

•

Attach the sensor(s) prescribed by the doctor.

•

Measure the SpO

, pulse rate, and pulse strength bar graph read-

ings.

•

Change the brightness of the display.

•

Change the pulse beep volume.

•

Turn off the alarm and alert tones for two minutes.

•

Turn on the alarm and alert tones.

•

Interpret the alarms.

•

View the alarm limits.

•

Interpret the SENSOR alert.

•

Interpret the BATT attention.

•

Turn off the monitor.

5. Tell the caregiver how to respond:

•

In case of a patient emergency, including what therapy to pro-
vide the patient.

•

In case an alarm sounds, including what therapy to provide the
patient.

•

In case the sensor alert sounds.

•

In case the batt attention sounds.

•

In case the caregiver has trouble operating the equipment.

Содержание 1850


















































































Результаты поиска

Содержание 1850

Отзывы:

Похожие инструкции для 1850

Бренды по названию

Популярные бренды

Smiths Medical 1850, Руководство по эксплуатации

Результаты поиска

Содержание 1850

Отзывы:

Похожие инструкции для 1850

Бренды по названию

Популярные бренды