2-30
7
Secure the fed media to the paper tube.
(1) Confirm the take-up direction, and secure
the media with adhesive tapes at three places;
first secure the center so that it is straight, and
then secure both sides.
-
Make sure that the direction of the attaching tape on the
take-up side matches the take-up direction setting (outer
side rewind/ inner side rewind).
-
If the media is attached to the paper tube at an angle it will
be fed at an angle, so use caution.
8
Adjust the tension bar guide position according to the
take-up direction.
Outer take-up :
Paper is wound so that the
print surface comes inside.
Inner take-up :
Paper is wound so that the
print surface comes outside.
Tapes
Tension bar guide
Tension bar guide
■
Inner take-up
■
Outer take-up
NOTES
