3-57
Section 3 Operation Panel Menu Operations
ADJUST Menu
This menu is used to set mechanical adjustment parameters.
When the
key is pressed, mechanical adjustment parameters
can be set.
(1) Adjustment pattern print (ADJUST PATTERN)
Prints the adjustment pattern for adjusting the printer mechanically
and electrically.
Printing can be stopped by pressing the
key during printing.
<Parameter (Enter a choices)>
- TEST PRINT:
Prints a block pattern with black and other
color.
- HEAD ADJ 1:
Prints a head adjustment pattern.
- HEAD ADJ 2:
Prints a pattern for checking the head
adjustment.
- ADJUST 1-1:
Prints only the left and right adjustment
pattern of HEAD ADJ 1.
- ADJUST 1-2:
Prints only the inter-head position
adjustment pattern of HEAD ADJ 1.
#ADJUST PATTERN
>TEST PRINT
FUNC
SYSTEM
ADJUST
RESET
key
#ADJUST PATTERN
>TEST PRINT
Menu Operations
