5-3
Section 5 Heater Controller Menu Operation
Temperature Control
(3) Temperature Control Stop Condition
Function:
To prevent useless current consumption, to protect
the media from being damaged due to heating by
heaters, and to protect the user from being burned
by touching the heaters when printing is not being
performed.
Status:
The ambient temperature is reached slowly.
Condition:
The printer is neither in preset temperature main-
taining status nor in standby temperature maintain-
ing status.
Start of heating
End of heating
Start of print
End of print
Printer heater preset temperature
Rear heater preset temperature
Front heater preset temperature
Standby temperature
Environmental temperature
Maintaining the
preset temperature
Maintaining the
stand by temperature
Maintaining the
preset temperature
Maintaining the
stand by temperature
Stop of
temperature control
Delay
time
setting
value
Delay
time
setting
value
Standby setting
time
Standby setting
time
(Time)
(Temperature)
Start of heating: The print start command is received and heating
starts. (The print operation does not start until the
heaters reach the preset temperature. However, if
"WAIT HEATER" is set to "SKIP", print opera-
tion starts even though the heaters do not reach
the preset temperature.)
Start of printing: The heaters reach the preset temperature and print-
ing starts.
End of printing: A print end command is received and printing
ends.
