3-48
(3) Back feed adjustment pattern
Prints a pattern for adjusting the media back feed amount.
Select the proper parameter according to the print mode.
<Parameter (Enter a value)>
-
NORMAL:
Select at adjustment in standard and high speed print modes.
-
H-QUALITY:
Select at adjustment in high quality print mode.
-
H-DENSITY:
Select at adjustment in high density print mode.
-
3 TIMES:
Select at adjustment in 3 TIMES print mode.
-
H-QUALITY 2:
Select at adjustment in the high quality 2 print mode.
-
H-DENSITY 2:
Select at adjustment in the high density 2 print mode.
-
DRAFT:
Select at adjustment in draft print mode.
(4) Media back feed correction value (unit: pulses)
Input a correction value of the media back feed based on the result
of the back pattern.
<Parameter (Enter a value)>
±
2000 pulses (
±
5 mm)
1 pulse=2.5
µ
m
# BACK PATTERN
>NORMAL
# BACK ADJUST
>+0000 PULSE
