1-6
Precautions in use
- Avoid change of temperature or humidity after opening the
package.
Set media in the printer after leaving media in the operation
environment for 3 hours or more. Suppress change of humidity
by turning the air conditioner ON/OFF.
- Due to media characteristics, curling of media in low humidity
and wrinkling of media in high humidity may occur easily.
Use media in a normal temperature and humidity environment
(around 23
°
C and 50%RH).
- Do not use scratched, wrinkled, curled, or dust-stained part of
media.
Especially, damaged edges (both edges) affect media feeding.
Also, do not drop or wet the media. Doing so may adversely
affect print quality and cause malfunctioning.
- Hold margins of the media so as not to touch the print surface.
Adhesion of sebaceous matter or sweat may adversely affect
print quality.
- Roll media correctly before setting in the printer.
Precautions for handling prints.
- Do not touch the print surface before ink dries.
Hold margins of the media for handling.
Especially use care within 24 hours after printing.
- Rubbing the print surface causes color fading or color transfer.
Do not superimpose print surfaces, to prevent color transfer.
- Do not superimpose on copy prints or laser prints, to prevent
sticking due to ink or toner.
- Do not rub, scratch, or hold the media, to prevent peeling.
- Do not rub or leave the media in wet condition, to prevent
blurring.
