2-21
Section 2 Basic Operations
Installing the Sub Scroller
1
Install the media on the sub scroller.
(1) Confirming the media for inner take-up or
outer take-up, insert it into the sub scroller.
(2) Lock the left flange tightly.
-
Take care not to damage the media edge when inserting
the media.
-
Place the media on the table when installing or removing
the media. Holding the media erect causes the media
winding to come loose, thereby skewed feed.
-
Before installing the media, clean the print surface and
sides of the media.
-
Specifications of media
Diameter: 165 mm
Weight: 24 kg (When dual roll kit is used)
-
When heavy media is fed to the sub scroller, the shaft
becomes bent, causing degrading of print quality and
skewing. When it is desired to use heavy media with the
sub scroller, use the optional dual roll kit. It can handle
media up to 24 kg.
Installing/Removing the Media
Sub scroller
Right flange is secured to the
scroller
Left flange
(Outer take-up)
NOTES
