SignaMax SC30010, Справочное руководство CLI

Страница: 77 / 671

Chapter 3
| General Commands
– 77 –
Example
In this example, the show history command lists the contents of the command
history buffer:
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
The ! command repeats commands from the Execution command history
buffer when you are in Normal Exec or Privileged Exec Mode, and commands
from the Configuration command history buffer when you are in any of the
configuration modes. In this example, the
!2 command repeats the second
command in the Execution history buffer ( config ).
Console#!2
Console#config
Console(config)#
configure
This command activates Global Configuration mode. You must enter this
mode to modify any settings on the switch. You must also enter Global
Configuration mode prior to enabling some of the other configuration modes,
such as Interface Configuration, Line Configuration, and VLAN Database
Configuration. See
“Understanding Command Modes” on page 66 .
Default Setting
None
Command Mode
Privileged Exec
Example
Console#configure
Console(config)#
Related Commands
end (79)