SignaMax SC30010, Справочное руководство CLI

Страница: 193 / 671

Chapter 8
| Authentication Commands
User Accounts and Privilege Levels
– 193 –
password - Password for this privilege level.
(Maximum length: 32 characters plain text or encrypted, case
sensitive)
Default Setting
The default is level 15.
The default password is “super”
Command Mode
Global Configuration
Command Usage
◆
You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec with the
enable command.
◆
The encrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file
during system bootup. There is no need for you to manually configure
encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (75)
authentication enable (196)
username
This command adds named users, requires authentication at login, specifies
or changes a user's password (or specify that no password is required), or
specifies or changes a user's access level. Use the
no form to remove a user
name.
Syntax
username name { access-level level | nopassword |
password { 0 | 7 } password }
no username name
name - The name of the user. (Maximum length: 32 characters,
case sensitive. Maximum users: 16)
The device has two predefined users,
guest which is assigned
privilege level 0 (Normal Exec) and has access to a limited number
of commands, and admin which is assigned privilege level 15 and
has full access to all commands.
access-level level - Specifies command access privileges. (Range:
0-15)