SignaMax SC30010, Справочное руководство CLI

Страница: 520 / 671

Chapter 21
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 520 –
ip igmp filter
(Global Configuration)
This command globally enables IGMP filtering and throttling on the switch.
Use the
no form to disable the feature.
Syntax
[ no ] ip igmp filter
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆ IGMP filtering enables you to assign a profile to a switch port that specifies
multicast groups that are permitted or denied on the port. An IGMP filter
profile can contain one or more, or a range of multicast addresses; but
only one profile can be assigned to a port. When enabled, IGMP join
reports received on the port are checked against the filter profile. If a
requested multicast group is permitted, the IGMP join report is forwarded
as normal. If a requested multicast group is denied, the IGMP join report is
dropped.
◆
IGMP filtering and throttling only applies to dynamically learned multicast
groups, it does not apply to statically configured groups.
Example
Console(config)#ip igmp filter
Console(config)#
ip igmp profile
This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the
no form to delete a profile number.
Syntax
[ no ] ip igmp profile profile-number
profile-number - An IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied
to join. The same profile can be applied to many interfaces, but only one