SignaMax SC30010, Справочное руководство CLI

Страница: 490 / 671

Chapter 20
| Quality of Service Commands
– 490 –
Example
This example creates a policy called “rd-policy,” uses the class command to
specify the previously defined “rd-class,” uses the set cos command to classify
the service that incoming packets will receive, and then uses the police rate
command to limit the average bandwidth to 100,000 Kbps.
Console(config)#policy-map rd-policy
Console(config-pmap)#class rd-class
Console(config-pmap-c)#set cos 3
Console(config-pmap-c)#police rate 100000
Console(config-pmap-c)#
set cos
This command modifies the class of service (CoS) value for a matching packet
(as specified by the
match command) in the packet’s VLAN tag. Use the no
form to remove this setting.
Syntax
[ no ] set cos cos-value
cos-value - Class of Service value. (Range: 0-7)
Default Setting
None
Command Mode
Policy Map Class Configuration
Command Usage
◆
The set cos command is used to set the CoS value in the VLAN tag for
matching packets.
Example
This example creates a policy called “rd-policy,” uses the class command to
specify the previously defined “rd-class,” uses the set cos command to
classify the service that incoming packets will receive.
Console(config)#policy-map rd-policy
Console(config-pmap)#class rd-class
Console(config-pmap-c)#set cos 3
Console(config-pmap-c)#police flow 10000 4000 conform-action transmit
Console(config-pmap-c)#