SignaMax SC30010, Справочное руководство CLI

Страница: 318 / 671

Chapter 10
| Access Control Lists
IPv4 ACLs
– 318 –
access-list ip
This command adds an IP access list and enters configuration mode for
standard or extended IPv4 ACLs. Use the
no form to remove the specified
ACL.
Syntax
[ no ] access-list ip { standard | extended } acl-name
standard – Specifies an ACL that filters packets based on the
source IP address.
extended – Specifies an ACL that filters packets based on the
source or destination IP address, and other more specific criteria.
acl-name – Name of the ACL. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
When you create a new ACL or enter configuration mode for an existing
ACL, use the
permit or deny command to add new rules to the bottom of
the list.
◆
To remove a rule, use the no permit or no deny command followed by the
exact text of a previously configured rule.
◆ An ACL can contain up to 1K rules.
Example
Console(config)#access-list ip standard david
Console(config-std-acl)#
Related Commands
permit, deny (319)
show ip access-list (323)
show ip
access-group
Shows port assignments for IPv4 ACLs PE
show ip access-list Displays the rules for configured IPv4 ACLs PE
Table 63: IPv4 ACL Commands
Command Function Mode