SignaMax SC30010, Справочное руководство CLI

Страница: 176 / 671

Chapter 5
| SNMP Commands
– 176 –
A1 10.1.19.23
Console#
Additional Trap Commands
memory
This command sets an SNMP trap based on configured thresholds for
memory utilization. Use the
no form to restore the default setting.
Syntax
memory { rising rising-threshold | falling falling-threshold }
no memory { rising | falling }
rising-threshold - Rising threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
falling-threshold - Falling threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
Default Setting
Rising Threshold: 90%
Falling Threshold: 70%
Command Mode
Global Configuration
Command Usage
Once the rising alarm threshold is exceeded, utilization must drop beneath the
falling threshold before the alarm is terminated, and then exceed the rising
threshold again before another alarm is triggered.
Example
Console(config)#memory rising 80
Console(config)#memory falling 60
Console#
Related Commands
show memory (85)