SignaMax SC30010, Справочное руководство CLI

Страница: 338 / 671

Chapter 10
| Access Control Lists
ARP ACLs
– 338 –
ip-address-bitmask
***
– IPv4 number representing the address bits
to match.
source-mac – Source MAC address.
destination-mac – Destination MAC address range with bitmask.
mac-address-bitmask
***
– Bitmask for MAC address (in hexadecimal
format).
log - Logs a packet when it matches the access control entry.
Default Setting
None
Command Mode
ARP ACL
Command Usage
New rules are added to the end of the list.
Example
This rule permits packets from any source IP and MAC address to the
destination subnet address 192.168.0.0.
Console(config-arp-acl)#$permit response ip any 192.168.0.0 255.255.0.0 mac
any any
Console(config-mac-acl)#
Related Commands
access-list arp (336)
show access-list arp
This command displays the rules for configured ARP ACLs.
Syntax
show access-list arp [ acl-name ]
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#show access-list arp
ARP access-list factory:
permit response ip any 192.168.0.0 255.255.0.0 mac any any
Console#
***. For all bitmasks, binary “1” means relevant and “0” means ignore.