SignaMax SC30010, Справочное руководство CLI

Страница: 71 / 671

Chapter 2
| Using the Command Line Interface
CLI Command Groups
– 71 –
CLI Command Groups
The system commands can be broken down into the functional groups shown
below
.
Table 4: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
73
System Management Display and setting of system information, basic modes of
operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, and the system clock
81
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
155
Remote Monitoring Supports statistics, history, alarm and event groups 179
User Authentication Configures user names and passwords, command
privilege levels, logon access using local or remote
authentication, management access through the web
server, Telnet server and Secure Shell; as well as port
security, IEEE 802.1X port access control, and restricted
access based on specified IP addresses
191
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, MAC address
authentication, filtering DHCP requests and replies, and
discarding invalid ARP responses
250
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address or
Ethernet type)
317
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
342
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
372
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
386
Congestion Control Sets the input/output rate limits, traffic storm thresholds,
and thresholds for broadcast and multicast storms which
can be used to trigger configured rate limits or to shut
down a port.
395
Loopback Detection Detects general loopback conditions caused by hardware
problems or faulty protocol settings 398
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
404
Spanning Tree Configures Spanning Tree settings for the switch 410