SignaMax SC30010, Справочное руководство CLI

Страница: 149 / 671

Chapter 4
| System Management Commands
Switch Clustering
– 149 –
Switch Clustering
Switch Clustering is a method of grouping switches together to enable
centralized management through a single unit. Switches that support
clustering can be grouped together regardless of physical location or switch
type, as long as they are connected to the same local network.
Using Switch Clustering
◆ A switch cluster has a primary unit called the “Commander” which is used
to manage all other “Member” switches in the cluster. The management
station can use either Telnet or the web interface to communicate directly
with the Commander through its IP address, and then use the Commander
to manage the Member switches through the cluster’s “internal” IP
addresses.
◆
Clustered switches must be in the same Ethernet broadcast domain. In
other words, clustering only functions for switches which can pass
information between the Commander and potential Candidates or active
Members through VLAN 4093.
◆ Once a switch has been configured to be a cluster Commander, it
automatically discovers other cluster-enabled switches in the network.
These “Candidate” switches only become cluster Members when manually
selected by the administrator through the management station.
◆
The cluster VLAN 4093 is not configured by default. Before using
clustering, take the following actions to set up this VLAN:
1.
Create VLAN 4093 (see “Editing VLAN Groups” on page 441 ).
2.
Add the participating ports to this VLAN (see “Configuring VLAN Interfaces”
on page 443 ), and set them to hybrid mode, tagged members, PVID = 1,
and acceptable frame type = all.
Table 26: Switch Cluster Commands
Command Function Mode
cluster Configures clustering on the switch GC
cluster commander Configures the switch as a cluster Commander GC
cluster ip-pool Sets the cluster IP address pool for Members GC
cluster member Sets Candidate switches as cluster members GC
rcommand Provides configuration access to Member switches PE
show cluster Displays the switch clustering status PE
show cluster members Displays current cluster Members PE
show cluster candidates Displays current cluster Candidates in the network PE